What Is Spun Filter Cartridge Manufacturing Machine?
spun filter cartridge manufacturing machine is made by K&M Technologies Ltd. to be ecologically sustainable and to be responsive to the worldwide call for sustainable development and energy saving. The adherence to environmentally friendly principle is a critical and most valued part of the product's development process, which can be proved by the sustainable materials that it adopts.
To successfully built a global brand image of KnMTech, we are dedicated to immersing our customers in the brand experience in every interaction we engage with them. We continue to inject new ideas and innovations into our brands to meet the high expectations from the market.
We work hard to make sure that customers are fully satisfied with our spun filter cartridge manufacturing machine and other suchlike products through KnMTech, but if something goes wrong, we endeavor to deal with it in a fast and efficient manner.
no data
On October 20 2020,we did the last plastic welding test and packaged the machine for our client from Bulgaria.
In the process of testing,we strictly check the quality of the equipment,and strictly control the quality of welding
plastic products.We can see the details of PTS-2000 and the welded products below.
standard plastic welding machine standard plastic welding machine with stand table
Plastic Welding Machine(1)
Plastic Welding Machine(2)
Plastic Welding Machine(3)
The plastic welding machine can be customized according to users' needs.For example,this time,we add
the protective film machine to the welding machine,our client's products need to be protected on the surface.
As you can see in the pictures(1,2,3).
Plastic Welding Horns
Plastic Welded products
Machine Packaging
We always guarantee the quality of our exports products,large welding machines like this are always transported
in wooden cases to ensure the impeccable integrity and safety of the goods.
How to choose the frequency of the ultrasonic cleaner?
The ultrasonic cavitation threshold value is closely connected with its frequency. Higher frequency comes with a higher threshold value and vice versa. The lower the cavitation threshold value, the more likely the cavitation is to occur. At the low frequencies, the interval time between the compression and sparsity of the liquid is longer so that the bubbles could grow to a larger size and enhance the cavitation strength, which is good for the cleaning. Therefore, the low-frequency ultrasonic cleaning equipment is often used in the cleaning of workpieces with large surfaces, or the surface of the workpieces is disdained seriously, which might damage or corrode the surface of the workpieces. So, it is inappropriate to use a low-frequency cleaner to wash the workpieces with high demanding surface finishing. Moreover, low frequency creates more noise. In the meanwhile, high-frequency ultrasound is more penetrating, which is suitable to clean the surface of the workpiece that is more complicated and has more blind holes or has stricter requirements on the surface.
On the other hand, the high-frequency ultrasound creates less noise so it is suitable for the cleaning of some small and high precision spare parts such as electronics, miniature bearing processing or magnetic material, etc. For some special workpieces like integrated circuit chips and silicon slices with coated membrane, the ultrasound with an even higher frequency would be a better choice. For some large workpieces such as automobile engines, valves, lower-frequency ultrasound could be applied. Normally the applicable frequency is within the range of 20-130kHz considering its effect and cost.
This brings us a question, what aspects should be we pay attention to before purchasing one specific ultrasonic cleaner that perfectly suits your needs?
1. Know well of your workpieces: the workpieces material, structure, shape, size, your cleaning quantity needs, cleaning result, and the procedure after the cleaning should be well known by you.
2. Dirt or filth to be cleaned: to be clear of the workpieces' oil or stain types such as ram drawing oil, polishing wax, carbon deposit, dust, fingerprint, etc.
3. Cleaning process: choose an appropriate cleaning process according to the attribution of the workpieces and stain condition, you could consult the equipment supplier for the suggestion. The cleaning process is a very important step before manufacturing the machine. It must be well chosen for it will have a long-term cleaning effect in the future.
4. Manual, semi-manual, or automatic mode: manual mode is usually suitable to wash small quantity workpieces with simple operation. The semi-manual mode could be used to clean large or heavy workpieces with middle or large quantities, this could reduce labor cost and enhance cleaning efficiency. Automatic mode is suitable to clean large quantity workpieces with stable and good cleaning results, but it requires a higher budget also. Users could choose the right model according to their own budget situation and other factors.
5. Cleaning tank size: the size depends on the workpieces cleaning quantity, structure, cleaning time, which means that a certain quantity of workpieces needs to be cleaned at a specific time. This could be calculated easily per your own cleaning requirements.
6. Ultrasonic power and frequency: the cleaning agents are long-term-used consumables. The Cleaning agents are divided into organic solvents and water-based cleaning agents. The choice of the cleaning agents is decided by the workpiece’s material and stain condition. The general principle is that the dirt can be cleaned quickly and thoroughly, and the appearance of the workpiece could remain basically undamaged.
In simple words:
1. First get to know about your cleaning purpose and the best way to clean your products
2. Decide your cleaning quantity so as to choose the corresponding power and volume
3. Know about the cleaning process-consult the equipment supplier
4. choose the most appropriate supplier by making a comprehensive comparison of price, cleaning process, and after-sale service, etc.
Of course, K&M tech always welcomes inquires all over the world.
Our products:
ultrasonic cleaner
This is a custom infrared welding machine and hot melt welding machine for filter core welding and end cap welding. The customer chose us because of the reliable welding quality and reasonable price.
Last Friday, our workers checked the details, packed the machines carefully, protected them with wrap-around film and then packed them into wooden boxes.Care was shown in every detail.
They are being sent to the customer by ship now.
Related Product: Infrared Welding Machine and Hot Melt Welding Machine.
no data
Send your inquiry
you might like
Contact us
we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
We are a company focusing on plastic equipment R&D and production applications.
Contact us
Contact person: Lucy Meng
Contact number: +86 15850300139
Email: mfrlucy@vip.163.com
WhatsApp: +86 15850300139
Address: No.1700, South Huangpujiang Road, Kunshan 215341, Suzhou City, China