 |
| Tank material: | |
|---|---|
| Heating power: | |
| Timer: | |
| Heater: | |
| Warranty: | |
| Quantity: | |
KM-C40
KnMTech
40kHz
Air Cooling
Cleaning Machine
The principle of ultrasonic cleaning machine is mainly through the transducer, the ultrasonic frequency power source of the sound energy is converted into mechanical vibration, radiate ultrasonic waves into the cleaning fluid in the tank by the ultrasonic cleaning tank wall, the microbubbles in the liquid inside the tank are able to keep vibrating under the action of sound waves. The vibration of the microbubbles destroys the adsorption of the dirt and the surface of the cleaning part, causing the fatigue damage of the dirt layer and being dissociated, and the vibration of the gas bubble washes the solid surface.
 |  |  |  |
Ultrasonic Cleaning Machine:
| Tank material | stainless steel SUS304 |
| Ultrasonic power | customized |
| Heating power | customized |
| Timer | 1-99min adjustable |
| Heater | 0-80ºC adjustable |
| Frequency | 17KHz/20KHz/25KHz/28KHz/40KHz/50KHz/68KHz/80KHz/100KHz/200KHz |
| Control | PLC control |
| Warranty | 1 year |
| Packing | woodbox |
| Tank capacity | customized |
| Tank Size | customized |
| Unit Size | customized |
Ultrasonic Cleaning Machine-Generator:
| Working Voltage | AC220V ±10% 50HZ |
| Power Control | Numerical control regulation |
| Relative humidity | 0-100% |
| Timing range | 0-60min |
| environment temperature | 0-40ºC |
| Product Weight | 8±2KG |
Different models of this same series generator are available:
| Model | Rated Power | Overcurrent | Frequency(Hz) | DimentionL*W*H(mm) |
| KM-X6-I | 600W-900W | 3.0A | 17K-200K | 370*290*130mm |
| KM-X6-II | 1200W-1500W | 5.0A | 17K-80K | 370*290*130mm |
| KM-X6-III | 1800W-2100W | 6.0A | 17K-40K | 370*290*130mm |
| KM-X6-IV | 2400W-2700W | 7.0A | 17K-40K | 370*290*130mm |
| KM-X6-V | 3000W | 7.5A | 17K-40K | 370*290*130mm |
1.It is driven by high-power devices imported from Japan, and its output power is strong. With its unique control circuit, the ultrasonic density is greatly improved, the cleaning work is more uniform, and the cleanliness is higher; 2.Overheat protection, over current protection, and short circuit protection; | |
3.The exterior design is more concise and fashionable; | |
4.With the function of remote switch machine, it is convenient to let the automatic machine controlled through PLC control; 5.Timed shutdown function,0-60 minutes adjustment, easy to use 6.With sweep frequency working mode, it can imitate throwing effect, so that the cleaning effect is more prominent; 7.Full digital design, keying frequency regulation, so that the frequency precision is higher, Play to the efficiency of the transducer; 8.Automatic fault detection function; 9.With 485 communication, it can be directly remote-controlled by touch screen or computer PLC; 10.With factory working time limit function, let your customers control the equipment at will; 11.With a unique constant current function, no matter how the load changes, it can ensure the output constant 12 With temperature control function, so that the tank temperature can be centralized to an interface to control (optional); 13.With the function of real-time detection of machine temperature, it can monitor the working temperature of equipment in real-time; 14.Unique power regulation function, it is easy to intuitively adjust to the desired current power; 15.With the display of cumulative working time, it is convenient to observe the working time of the equipment; 16.Unique power indicator display, it is convenient for the current use of power ratio value; 17.Fault alarm function; 18.Cleaning mode can be set; 19.Working mode setting, it can be set to intermittent work; 20.Display mode setting, it can display power or desired frequency, current, etc; 21.The full-bridge circuit architecture design makes the conversion efficiency give a full play; |
1. All stainless steel structure, according to different needs can be made into bottom vibration type side vibration type and top vibration type three to meet different cleaning requirements; 2. Product materials 304.2.0 mm, 316.2.0 mm, 304.2.5 mm, mm, 316.2.5 316.3.0, titanium plates of 2.5 mm can be chosen, the above material for actual thick material, does not provide other material thickness, except for special cases; 3. The vibration frequency of plate: 17KHz, 21kHz, 25kHz, 28kHz, 40kHz, 68kHz, 80kHz, 100kHz, 120kHz,temporarily no double-frequency models |
The ultrasonic cleaning machines are widely used in many industries, they can be used for accessories, electronic products, machinery, hardware, accessories, golf balls, household use, necklaces, earrings, bracelets, razor heads, nibs, coins, pins, etc
Cleaning Machine
The principle of ultrasonic cleaning machine is mainly through the transducer, the ultrasonic frequency power source of the sound energy is converted into mechanical vibration, radiate ultrasonic waves into the cleaning fluid in the tank by the ultrasonic cleaning tank wall, the microbubbles in the liquid inside the tank are able to keep vibrating under the action of sound waves. The vibration of the microbubbles destroys the adsorption of the dirt and the surface of the cleaning part, causing the fatigue damage of the dirt layer and being dissociated, and the vibration of the gas bubble washes the solid surface.
| | | |
Ultrasonic Cleaning Machine:
| Tank material | stainless steel SUS304 |
| Ultrasonic power | customized |
| Heating power | customized |
| Timer | 1-99min adjustable |
| Heater | 0-80ºC adjustable |
| Frequency | 17KHz/20KHz/25KHz/28KHz/40KHz/50KHz/68KHz/80KHz/100KHz/200KHz |
| Control | PLC control |
| Warranty | 1 year |
| Packing | woodbox |
| Tank capacity | customized |
| Tank Size | customized |
| Unit Size | customized |
Ultrasonic Cleaning Machine-Generator:
| Working Voltage | AC220V ±10% 50HZ |
| Power Control | Numerical control regulation |
| Relative humidity | 0-100% |
| Timing range | 0-60min |
| environment temperature | 0-40ºC |
| Product Weight | 8±2KG |
Different models of this same series generator are available:
| Model | Rated Power | Overcurrent | Frequency(Hz) | DimentionL*W*H(mm) |
| KM-X6-I | 600W-900W | 3.0A | 17K-200K | 370*290*130mm |
| KM-X6-II | 1200W-1500W | 5.0A | 17K-80K | 370*290*130mm |
| KM-X6-III | 1800W-2100W | 6.0A | 17K-40K | 370*290*130mm |
| KM-X6-IV | 2400W-2700W | 7.0A | 17K-40K | 370*290*130mm |
| KM-X6-V | 3000W | 7.5A | 17K-40K | 370*290*130mm |
1.It is driven by high-power devices imported from Japan, and its output power is strong. With its unique control circuit, the ultrasonic density is greatly improved, the cleaning work is more uniform, and the cleanliness is higher; 2.Overheat protection, over current protection, and short circuit protection; | |
3.The exterior design is more concise and fashionable; | |
4.With the function of remote switch machine, it is convenient to let the automatic machine controlled through PLC control; 5.Timed shutdown function,0-60 minutes adjustment, easy to use 6.With sweep frequency working mode, it can imitate throwing effect, so that the cleaning effect is more prominent; 7.Full digital design, keying frequency regulation, so that the frequency precision is higher, Play to the efficiency of the transducer; 8.Automatic fault detection function; 9.With 485 communication, it can be directly remote-controlled by touch screen or computer PLC; 10.With factory working time limit function, let your customers control the equipment at will; 11.With a unique constant current function, no matter how the load changes, it can ensure the output constant 12 With temperature control function, so that the tank temperature can be centralized to an interface to control (optional); 13.With the function of real-time detection of machine temperature, it can monitor the working temperature of equipment in real-time; 14.Unique power regulation function, it is easy to intuitively adjust to the desired current power; 15.With the display of cumulative working time, it is convenient to observe the working time of the equipment; 16.Unique power indicator display, it is convenient for the current use of power ratio value; 17.Fault alarm function; 18.Cleaning mode can be set; 19.Working mode setting, it can be set to intermittent work; 20.Display mode setting, it can display power or desired frequency, current, etc; 21.The full-bridge circuit architecture design makes the conversion efficiency give a full play; |
1. All stainless steel structure, according to different needs can be made into bottom vibration type side vibration type and top vibration type three to meet different cleaning requirements; 2. Product materials 304.2.0 mm, 316.2.0 mm, 304.2.5 mm, mm, 316.2.5 316.3.0, titanium plates of 2.5 mm can be chosen, the above material for actual thick material, does not provide other material thickness, except for special cases; 3. The vibration frequency of plate: 17KHz, 21kHz, 25kHz, 28kHz, 40kHz, 68kHz, 80kHz, 100kHz, 120kHz,temporarily no double-frequency models |
The ultrasonic cleaning machines are widely used in many industries, they can be used for accessories, electronic products, machinery, hardware, accessories, golf balls, household use, necklaces, earrings, bracelets, razor heads, nibs, coins, pins, etc
